9 попаданий, согласно протоколу Тамийя
Согласно этой таблице настроек можно программировать через ИК пульт SONYначиная с модели 839
MAKO BATTLE MODES
To ascertain the state and operating mode of your MAKO you must be able to view a connected external LED. On power up your MAKO will flash the Indicator LED a number of times corresponding to the version of firmware running on the micro controller. Full details of the firmware version are also transmitted by REMORA and can be viewed on the command station. After showing the firmware status the LED will stay lit for a period of 5 seconds. During this period the MAKO can be programmed using a standard SONY TV remote. By pressing the buttons on your remote the following battle modes are activated.
1: Light Battle Tank – 3 lives, 3 second reload period, 40 shell magazine capacity, 10 sec repair time
2: Medium Battle Tank – 5 lives, 5 second reload period, 60 shell magazine capacity, 14 sec repair time
3: Heavy Battle Tank – 9 lives, 9 second reload period, 80 shell magazine capacity, 18 sec repair time
4: Light Bergepanzer – 3 lives, 6 second reload period, 80 repair capacity, 10 sec repair time
5: Medium Bergepanzer – 3 lives, 10 second reload period, 80 repair capacity, 14 sec repair time
6: Heavy Bergepanzer – 3 lives, 10 second reload period, 80 repair capacity, 18 sec repair time
7: Autoberg: Automatic Bergepanzer mode.
8: MAUS Mode: Heavy tank setting firing the Tamiya 2 shot kill code.
9: Heng Long/Taigen MFU selection and optimisation
0: Display Diagnostics – Displays current MAKO setting on the Diagnostic LCD (sold separately)
MENU: Assign Battle Unit Identification Number
Скорее всего у тебя настройки в режиме 9.
Ответить с цитированием
