Страница 1 из 3 123 ПоследняяПоследняя
Показано с 1 по 10 из 29

Тема: T-72 Build Tread (for our Colleagues abroad)

  1. #1
    Старшой на раздаче/ ЦСТК Аватар для HAL
    Регистрация
    13.03.2009
    Адрес
    Russia, Moscow
    Сообщений
    14,703
    Записей в дневнике
    147
    Вес репутации
    10

    Трэд Постройки T-72 Build Tread (for our Colleagues abroad)

    Hi, guys!

    As promised I am publishing here the tread to duplicate what is being done here http://www.d-i-m.su/forum/showthread.php?t=3668

    But in more friendly manner, using English, to get delivered this tread more comfortably for you.

    I was hesitating "to be or not to be...", because from the very beginning was not sure about this model. Besides HL has announced already about its T-90.

    So before making any decision I have compared two models. This is my personal point of view, but both models (in stock) are wonderful and good 1) for upgrade up to different modification 2) to build as stock model for a rctank-rookie...

    So comparison - T90 vs T72...




    Moving on...
    ПОКА ОСТАЮТСЯ ТЕ, КТО ПОМНИТ О ТОМ, ЧТО БЫЛО -
    ВСЕГДА БУДУТ ТЕ, КТО НЕ СМОЖЕТ ПРИНЯТЬ ТОГО, ЧТО МОЖЕТ БЫТЬ..


    مدير الخزان

  2. #2
    Старшой на раздаче/ ЦСТК Аватар для HAL
    Регистрация
    13.03.2009
    Адрес
    Russia, Moscow
    Сообщений
    14,703
    Записей в дневнике
    147
    Вес репутации
    10

    По умолчанию

    Well my first impression regarding tracks was...

    I had no impression at all. As comparing them to MATO or Taigen tracks these ones do not look serious at all.
    Caterpillar's or track's grousers do not look like they are made properly. But still...



    ПОКА ОСТАЮТСЯ ТЕ, КТО ПОМНИТ О ТОМ, ЧТО БЫЛО -
    ВСЕГДА БУДУТ ТЕ, КТО НЕ СМОЖЕТ ПРИНЯТЬ ТОГО, ЧТО МОЖЕТ БЫТЬ..


    مدير الخزان

  3. #3
    Старшой на раздаче/ ЦСТК Аватар для HAL
    Регистрация
    13.03.2009
    Адрес
    Russia, Moscow
    Сообщений
    14,703
    Записей в дневнике
    147
    Вес репутации
    10

    По умолчанию

    Figure of the tank commander needs to be re-made as well...

    ПОКА ОСТАЮТСЯ ТЕ, КТО ПОМНИТ О ТОМ, ЧТО БЫЛО -
    ВСЕГДА БУДУТ ТЕ, КТО НЕ СМОЖЕТ ПРИНЯТЬ ТОГО, ЧТО МОЖЕТ БЫТЬ..


    مدير الخزان

  4. #4
    Старшой на раздаче/ ЦСТК Аватар для HAL
    Регистрация
    13.03.2009
    Адрес
    Russia, Moscow
    Сообщений
    14,703
    Записей в дневнике
    147
    Вес репутации
    10

    По умолчанию

    Now he is at his place - inside, with slight change of hands position...

    ПОКА ОСТАЮТСЯ ТЕ, КТО ПОМНИТ О ТОМ, ЧТО БЫЛО -
    ВСЕГДА БУДУТ ТЕ, КТО НЕ СМОЖЕТ ПРИНЯТЬ ТОГО, ЧТО МОЖЕТ БЫТЬ..


    مدير الخزان

  5. #5
    Аватар для ssl19470
    Регистрация
    01.04.2014
    Адрес
    Новороссийск
    Сообщений
    356
    Вес репутации
    0

    По умолчанию

    The brother of prairie - Kalmyk.
    Суслика видишь? Нет? И я нет. А он есть!

  6. #6
    Старшой на раздаче/ ЦСТК Аватар для HAL
    Регистрация
    13.03.2009
    Адрес
    Russia, Moscow
    Сообщений
    14,703
    Записей в дневнике
    147
    Вес репутации
    10

    По умолчанию

    DeA movie regarding rctank battle (DeA version)...



    As it is only IMHO will be very straight:

    Positive:

    1) Good idea, general plan and foreplan

    2) Music

    3) It is clearly shown that tracks do work of this type of surface, rc tanks move quite smoothly without any slippery

    4) Recoil works quite good + body recoil adds the good impression overall

    Negative:

    1) people that have made this movie and pilots of rctanks do not know anything about rc tank battles at all. The place itself is not a good choice for filming, as well as the angles of filming. May be it would be better to build a battlefield... And add some effects (as Tamiya adds). then the impression would be different.

    2) rctanks are running like rouches - not good

    3) main gun shrinks because of these funny movements

    4) hit visualization is very poor - not acceptable in our battles.
    ПОКА ОСТАЮТСЯ ТЕ, КТО ПОМНИТ О ТОМ, ЧТО БЫЛО -
    ВСЕГДА БУДУТ ТЕ, КТО НЕ СМОЖЕТ ПРИНЯТЬ ТОГО, ЧТО МОЖЕТ БЫТЬ..


    مدير الخزان

  7. #7
    Старшой на раздаче/ ЦСТК Аватар для HAL
    Регистрация
    13.03.2009
    Адрес
    Russia, Moscow
    Сообщений
    14,703
    Записей в дневнике
    147
    Вес репутации
    10

    По умолчанию

    Цитата Сообщение от ssl19470 Посмотреть сообщение
    The brother of prairie - Kalmyk.
    Heh!
    Well, I think our foreign colleagues will not understand this joke. As you are to know Russian Poetry...

    And as the original says: "... and brother of steppe - Kalmyk!"
    ПОКА ОСТАЮТСЯ ТЕ, КТО ПОМНИТ О ТОМ, ЧТО БЫЛО -
    ВСЕГДА БУДУТ ТЕ, КТО НЕ СМОЖЕТ ПРИНЯТЬ ТОГО, ЧТО МОЖЕТ БЫТЬ..


    مدير الخزان

  8. #8
    Старшой на раздаче/ ЦСТК Аватар для HAL
    Регистрация
    13.03.2009
    Адрес
    Russia, Moscow
    Сообщений
    14,703
    Записей в дневнике
    147
    Вес репутации
    10

    По умолчанию

    Sprockets tests.
    I have tested them using MATO and HL standard gear. Good impression, all is being fixed with bolts quite good.



    More tracks...

    ПОКА ОСТАЮТСЯ ТЕ, КТО ПОМНИТ О ТОМ, ЧТО БЫЛО -
    ВСЕГДА БУДУТ ТЕ, КТО НЕ СМОЖЕТ ПРИНЯТЬ ТОГО, ЧТО МОЖЕТ БЫТЬ..


    مدير الخزان

  9. #9
    Старшой на раздаче/ ЦСТК Аватар для HAL
    Регистрация
    13.03.2009
    Адрес
    Russia, Moscow
    Сообщений
    14,703
    Записей в дневнике
    147
    Вес репутации
    10

    По умолчанию

    Main road wheels - done out of plastic with rubber tires. Quite good.

    ПОКА ОСТАЮТСЯ ТЕ, КТО ПОМНИТ О ТОМ, ЧТО БЫЛО -
    ВСЕГДА БУДУТ ТЕ, КТО НЕ СМОЖЕТ ПРИНЯТЬ ТОГО, ЧТО МОЖЕТ БЫТЬ..


    مدير الخزان

  10. #10
    Старшой на раздаче/ ЦСТК Аватар для HAL
    Регистрация
    13.03.2009
    Адрес
    Russia, Moscow
    Сообщений
    14,703
    Записей в дневнике
    147
    Вес репутации
    10

    По умолчанию

    Turret is very interesting.
    Was studying it and found some peculiar things.

    Lower part - good quality moulding..
    Have looked if it is possible to install standard parts from HL or MATO.

    The standard rotation ring from HL from ZTZ in general could be installed, but you will have to redo the wi-fi niche.

    Airsoft gun body just is put to see how the main gun will look.

    All the rest mechanisms: main gun elevation unit and recoil units will not be fixed there. Either you will have to re-work the turret.


    ПОКА ОСТАЮТСЯ ТЕ, КТО ПОМНИТ О ТОМ, ЧТО БЫЛО -
    ВСЕГДА БУДУТ ТЕ, КТО НЕ СМОЖЕТ ПРИНЯТЬ ТОГО, ЧТО МОЖЕТ БЫТЬ..


    مدير الخزان

Страница 1 из 3 123 ПоследняяПоследняя

Похожие темы

  1. Hooben T 55 build
    от sevoblast в разделе от Т-44 до 1991 года
    Ответов: 40
    Последнее сообщение: 24.09.2017, 18:55

Ваши права

  • Вы не можете создавать новые темы
  • Вы не можете отвечать в темах
  • Вы не можете прикреплять вложения
  • Вы не можете редактировать свои сообщения
  •  
Курс валют предоставлен сайтом kurs.com.ru